Components for Roll Forming Machine

These component is a part of roll forming machine. They make the machine more convinient to use, or more productive.

 Corrugated Panel Forming Machine 836 Type

Motorized Cuting and Guide Pillar

Fast drive system is a good choice for roll forming machine. For normal machine, it is motor drive, and the speed is about 8-10m/min. but for hydraulic drive, the speed is about 15-20m/min. The forming speed is doubled, and the quality of the panel is the same. You add about 2700 USD, but your forming speed is doubled. In this way, you also save 50% of your worker labor. Also, you will have a quick production. If you have order in hand, you will do it very fast, and get more orders in this way. For example. you need 2 worker when running the machine. Every worker, the salary is 500 usd per month. For normal machine, you need to pay 2 workers 500*2=1000 usd per nonth. Every year, 1000*12=12000 usd. For fast machine, your worker only need to work half time, so the salary for worker every year is 12000/2=6000 usd. You save 6000 usd every year.If you use the machine for 5 year, you will save 6000*5=30000 USD. You also save cost for electric power. Here you can see the roll forming machine and glazed tile machine, which are equipped with hydraulic drive system to boost production speed. photos for fast drive system

Fast Drive System

control cabinet

Automatic Control System

touch screen delta

Touch Screen for Controlling System

product stand for roll forming machine (6)

product stand for roll forming machine

product stand for track and stud machine

product stand for track and stud machine

2 parts for roll forming machine

2 parts for roll forming machine

manual pre cutter

Manual Pre Cutter