Decoiling the sheet→Sheet guiding→Roll forming→Measure length→Cutting the panel→Panels to product stand
Q235 or equivalent, galvanized coil
self-lock roof sheet roll forming machine is equipped with auto cutting system.
Before production, you input your requirement into control cabinet. For example, 3250 mm per piece, 20 pieces in total.
When the sheet comes to 3250 mm length, the machine will slow down-stop-cut-run again. When you get 20 pieces, the machine will fully stop.
You can set any length and pieces according to your actual need.
The whole process is automatically controlled by computer. In this way, you can ensure the accuracy, and easy work.
one machine can produce different size by changing spacers. Please
can cut any size from width 80-300, height 40-80. any size is ok. So it is very easy for production.
Main frame: 350 H steel. More stable, no shaking.
Medium plate: 18 mm thickness
45# steel, hard chrome plating.
the plating chrome of roller surface: 0.05 mm
it is used to control the width and position of the steel sheet. The sheet is guided into the machine with correct position, to make sure the panel is neat and parallel.
used to support the coil