Stud and Track Roll Forming Machine (Light Steel Keel Machine)

This automatic stud and track machine, also known as a light steel keel roll forming machine, is designed for continuous production of drywall studs, tracks, and light gauge steel profiles. It integrates advanced roll forming technology, hydraulic punching, and automatic cutting to ensure high precision, efficiency, and long-term stable operation.

Product Features and Technical Attributes

• Machine Type: Stud and track roll forming machine

• Alternative Name: Light steel keel machine

• Forming Method: Cold roll forming

• Applicable Profiles: Stud, track, C channel, U channel

• Material Thickness Range: 0.6–1.2 mm

• Material Type: GI, PPGI, cold rolled steel, galvanized steel

• Yield Strength: Up to 350 MPa

• Forming Stations: 12–20 stations (customizable)

• Roller Material: GCr15 bearing steel, heat treated

• Shaft Material: 45# solid steel, precision machined

• Shaft Diameter: 65–80 mm

• Main Frame Structure: Welded steel frame

• Driving System: Gearbox or chain drive

• Main Motor Power: 7.5–15 kW

• Hydraulic Station Power: 4–7.5 kW

• Cutting Method: Hydraulic flying cutting

• Cutting Blade Material: Cr12Mov, heat treated

• Punching System: Hydraulic punching with mold set

• Control System: PLC automatic control

• Operating Interface: Touch screen (HMI)

• Voltage Standard: 380V / 50Hz / 3 Phase (customizable)

• Production Speed: 10–25 m/min

• Length Accuracy: ±1.0 mm

• Profile Width Adjustment: Manual or automatic

• Feeding System: Coil decoiler + guiding device

• Decoiler Type: Manual or hydraulic decoiler

• Decoiler Capacity: 3–5 tons

• Leveling System: Integrated sheet leveling unit

• Lubrication System: Manual or automatic lubrication

• Safety Protection: Emergency stop and safety covers

• Noise Level: Low noise industrial standard

• Surface Finish: Smooth, scratch-free forming

• Continuous Production: Supported

• Automation Level: High automation

• Maintenance Requirement: Low maintenance design

• Machine Color: Blue (customizable)

• Installation Support: On-site or remote guidance

• Operator Requirement: 1–2 workers

• Service Life: Long-term industrial use

• Customization: Profile size and punching holes customizable

• Application Industry: Construction and building industry

• Application Products: Drywall system, ceiling system, partition wall

• Export Standard: CE optional

Application Scope

The stud and track roll forming machine is widely used for producing light steel keel systems applied in residential buildings, commercial buildings, industrial workshops, ceiling systems, and partition wall frameworks. It is an ideal solution for manufacturers seeking high efficiency, precision, and automation.

Advantages

• High forming accuracy and consistent profile quality

• Stable operation with robust structure

• Flexible design for different stud and track sizes

• High production efficiency and reduced labor cost

• Suitable for mass production and long-term operation